MERINOS WOOL CAPS

MERINOS WOOL CAPS OF VERY FINE QUALITY
SELF GRIPPING, TIE-ON AND PVC BACKING TYPE
FIT TO POLISH BY ABRASIVE COMPOUNDS AND POLISH

SELF GRIPPING AND TIE-ON TYPE MERINOS WOOL CAP

MERINOS WOOL CAP OF VERY FINE QUALITY.
SELF GRIPPING AND TIE-ON TYPE
FIT TO POLISH BY ABRASIVE COMPOUND AND BY POLISH
AVAILABLE DIAMETERS: 80 - 150 - 160 - 180 - 200 MM
OTHER DIAMETERS ON REQUEST
MERINOS WOOL CAPS - HARD BACKING - SINGLE SIDED

MERINOS MANUFACUTRED WOOL CAPS - 4 PLY TWISTED WOOL YARN - PVC SELF GRIPPING SUPPORT
SINGLE SIDED
INSIDE DIAMETER 8" OR 6"
WHITE COLOUR :  AGGRESSIVE WOOL - FIT FOR COARSE COMPOUNDS
YELLOW COLOUR: SOFT WOOL - FIT FOR FINE COMPOUNDS
ADVISED FOR AUTOMOTIVE, AERONAUTIC, MARBLE AND WOOD INDUSTRY
RECOMMENDED SPEED: FROM 2000 TO 3000 RPM. IN ANY CASE DO NOT EXCEED 5800 RPM
WHEN THE CAP IS USED WITH  A PAD ( PAD RECOMMENDED: OUR LINE FOR MERINOS WOOL CAPS), PRESS IT FIRMLY ON THE CENTER OF THE CAP TO ENSURE A PERFECT ADHESION OF THE TWO SURFACES.
POLISH AT A LOW ANGLE - ALMOST FLAT- ON THE SURFACE TO BE GLAZED
ON CONTOURS AND DETAILS, REDUCE THE MACHINE PRESSURE IN ORDER TO AVOID BURNING OR OVERHEATING ON THE SURFACE TO BE TREATED
CARE AND CLEANING:
BLOW REGULARLY THE CAP BY COMPRESSED AIR TO REMOVE THE EXCESS OF COMPOUND.
IF THE CAP IS CLOGGED, MAKE IT DRY AND THEN BLOW IT BY COMPRESSED AIR.
MERINOS WOOL CAPS - HARD BACKING - DOUBLE SIDED

 
MERINOS MANIFACTURED WOOL CAP 
4 PLY TWISTED WOOL YARN
PVC SUPPORT

DOUBLE SIDED  - DIAMETER 6" OR 8" - 5/8 CONNECTION - DOUBLE CAP 5/8" AND M14 ADAPTATOR
WHITE COLOUR: AGGRESSIVE WOOL, FIT FOR COARSE COMPOUNDS
YELLOW COLOUR: SOFT WOOL, FIT FOR FINE COMPOUNDS
ADVISED FOR AUTOMOTIVE, NAUTIC, AERONAUTIC, MARBLE AND WOOD INDUSRTY

RECOMMENDED POLISHING SPEED: FROM 2000 TO 3000 RPM. IN ANY CASE DO NOT EXCEED 5800 RPM
POLISH AT A LOW ANGLE (ALMOST FLAT) ON THE SURFACE TO BE GLAZED
ON CONTOURS AND DETAILS, REDUCE THE MACHINE PRESSURE IN ORDER TO AVOID BURNING OR OVERHEATING ON THE SURFACE TO BE TREATED.


CARE AND CLEANING:
BLOW REGULARLY THE CAP BY COMPRESSED AIR TO REMOVE THE EXCESS OF COMPOUND. IF THE CAP IS CLOGGED, MAKE IT DRY AND BLOW IT.